Pressure riveting machine is direct extrusion, like punching machine, is pressed in, spin riveting machine is passing the spindle motor through the coupling movement, hydraulic pressure system, driving the piston down along with the spindle at the same time, when the rivet head comes into contact with the rivet, rivet head around the center line of the rivet (i.e., the main shaft centerline orbit, and riveting head rotates, the tangential force under the action of forming a non-slip rolling.

Characteristics of monitoring system of riveting press

Pressure riveter monitoring system force range from 0~100KG to 0~10T;

Working height from 200mm~300mm;

Test accuracy up to 0.5%F.S.(optional sensor with different test accuracy)

Pressing speed adjustable;

With press-mounting counting function; Effectively solve the misjudgment of press-assembly monitoring caused by machining error of press-assembly workpiece.

Germany imported process monitor and precision sensor;

High prestorage of 8 sets of different monitoring parameters;

3 programs can be set: Y=f (x); Y=f (t); Y=f (x, t);

Press monitoring system can support Ethernet, RS485 or Profibus networking;

Real-time monitoring of pressure VS displacement curve;

Supports up to 1 envelope control and 3 window monitoring;

A maximum of two upper limits can be set. If the upper limit is exceeded, the device stops pressing.

The weight ranges from 35KG to 300KG.